Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch
SKU: C23B200W

Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor

€41.91
€41.91
(-0%)
Hurry up! only 48 left
Limited-Time Offers, End in: 151D 8H 23M 0S
PTZ: 2MP camera
Subtotal: €41.91
Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor Cameras Bseedswitch

Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor

€41.91

Bseed 3MP IP Camera 1080P Tuya Smart Camera With Auto Tracking Pet Monitor

€41.91
PTZ: 2MP camera
Bseed 3MP IP Camera 1080P Tuya Smart Home WiFi Indoor Wireless Security CCTV Surveillance Camera With Auto Tracking Baby Pet Monitor
Product Introduction:
Sensor type: 1/3 "CMOS
Voice: built-in MIC/Speaker
Maximum image size: 1920 x 1080
Storage function: SD card (MAX 128G), cloud storage
Sensor pixel: 2MP
Image: support sharpness switching
Maximum viewing angle: 100 ° wide angle
Communication protocol: TCP/IP, HTTP, DHCP, DNS, RTSP
Lens: 3.6mm F2.0
Wireless standard: 2.4G WIFI (IEEE802.11b/g/n)
Infrared distance: 0~10m
Network security: WPA-PSK/WPA2-PSK
Wide Dynamic: Digital Wide Dynamic
Operating temperature: - 20 ° C~50 ° C
Video compression standard: H.264
Power supply: DC5V, 1A
Compressed output code rate: 32Kbps~2Mbps
Power consumption: 4.5W MAX
Frame rate: 1~25 frames/second
Supported platforms: Android 5.0/OS 9.0 and above

Certifications:CE,FCC, ROHS
Function introduction:
Flip:
After the device is installed, the image may be inverted. Turn on the device's flipping function on the App to restore the image to its original position
Mobile alarm:
By setting the motion detection sensitivity, i.e. "high, medium and low", you can more accurately identify whether there is an object moving in the screen, greatly reducing the probability of false positives due to changes in light or other interference factors, and sending a notice to your mobile phone at the same time
Video storage:
Support SD card or cloud video recording, support event video storage, and do not let you miss any details at home (cloud services require additional charges, if necessary, please purchase by yourself)
Day night switching:
It can automatically switch between day mode and night mode, giving you a clear and smooth view no matter day or night
PTZ control:
Use the mobile app to rotate the camera in any direction to experience different perspectives and capture any corner you want to see
COMMON PROBLEM
Q: Failed to add during the distribution network?
A: Please ensure that the mobile phone and the device are connected to the same network segment and the network process is stable. Next, please ensure that the WiFi password is entered correctly again
Q: Scan the code again to add again after the addition fails or is it unsuccessful?
Answer: It is recommended to restart the device or power off the device after the addition fails, and then try to add it again.
Q: Can the device preview normally?
A: Check whether the network signal is too weak. You can place the camera near the router. If it is not enough, you are recommended to reset the device and add it again.
Q: After resetting the device, why is it still in the device list?
A: Resetting the device is only to reset the network configuration of the camera, but cannot change the configuration on the app. To delete a camera, you must log in to the app to delete it.
Q: How to switch the camera network to another router?
A: First, remove and reset the device on the app, and then configure the device again through the app.
Q: Why can't the device recognize the SD card?
Answer: It is recommended to plug and unplug the SD card after power failure. Check whether the SD card is normally available and the format is FAT32. When the mobile phone network or device network is unstable, the app will also prompt that the SD card cannot be recognized.
Q: If the device is online and there are alarm events, the mobile terminal cannot receive information?
Answer: Please confirm that the relevant reminder function in the app settings has been turned on; Message notification and permission confirmation have been enabled in the mobile system.
Q: How can devices be shared with friends?
A: The device is shared with friends. Friends must also have registered an App account in the same country, and then accept the friend application in the App message. They can share the device only after they are added as friends.

Q: Can your dimmer switch be controlled by multiple points?
A: Yes, Our dimmer switch currently can do 2-way dimmer switch, but you need to buy at least 2 pieces(TW-GL86ZTD11,TW-GL86TDI11,GL86TD12)

Q: Do you have switches for multi-point control?
A: Yes, our smart light switch supports multi-control association.(Both WiFi and Zigbee series)

Q: Can your dimmer switch form 2-way with a light switch?
A: No. The dimmer switch can only be connected with the Dimmer switch, and cannot form 2-way with other switches

Q: Can your smart switch use voice control?
A: Yes. All of our smart switches can be controlled by voice through Alexa, Google Assistant, and some switches support Tmall Genie, Xiaodu, Yandex

Q: What should I do if the switch does not work after installing the upper panel?
A: Please do not turn on the power when installing the panel. You can try to disconnect the power and wait for 30 seconds before restarting. Please check the orientation of the iron plate, the side with the letters CE and RoHS is the backside

Q: What should I do if the blue light is not on when the product is installed?
A: Please use the electric test pen to check whether the wiring is electrified

Q: Does your smart touch sensor light switch need a neutral wire to install?
A:We have a different versions, with/without the neutral line version, support multiple wiring methods

Q: Can your smart touch light switch work with Home Kit?
A: Sorry, Our item can’t work with them now.

Q: Can your smart light switch work with Smart Life Tuya or Google Alexa?
A: Yes, it can work with them.

Q: Do you offer a 2-way wifi touch light switch?
A: Yes, we offer a 2-way wifi touch switch, it functions stably.But you must at least buy 2 pieces 2-way wifi switches. ( APP use multi-control association function)

Q: Does your switch have a backlight?
A: The blue backlight will be on when the wiring is successful. Allowing you to notice Our touch switch clearly in the dark.

Q: Does our switches can install by vertical or Horizontal for 157mm/228mm glass panel?
A: Yes, we can install it in different ways,

Q: Do you offer 2-way touch light switch?
A: Yes, we offer 2-way touch switch, it functions stably. But you must at least buy 2 pieces 2-way Touch switches.

Q: What does 2way mean?
A: 2way means you can turn on/off the same light from different places.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
F
Fortune Sibanda

The box was slightly damaged, but the camera is fine

Related Products