No Products in the Cart
Happy Summer, Enjoy OFF(Jun.1st-Jun.31th)✨
💰Get €3 Off The First Order, Code: Newer3
💰Get €6 off over €89 ,Code: Jun6
💰Get €15 off over €199,Code:Jun15
💰Get €20 off over €299,Code:Jun20
💰Get €45 off over €599,Code:Jun45
BSEED Tuya ZigBee3.0 Thermostatic Valve Smart Radiator Actuator Programmable Temperature Controller Support APP Google Alexa
Support by bseed ZigBee gateways hub
The device moves a valve to intelligently control the flow of heat to the radiator. With the Thermostat Radiator Valve TV02 you can conveniently adjust the room temperature between 5-30℃, and save more than 15% of energy.
The device is part of the Tuya smart home system and works with the ZigBee 3.0 protocol. All devices on the system can be configured comfortably and individually with the Tuya smartphone app. The temperature can be controlled individually, room by room.
The radiator thermostat fits all common radiator valves and is easy to mount without having to drain any water or intervene in the heating system. The additional boost function enables the radiator to be heated up quickly for a brief period of time by opening the valve for 5 minutes. There will be a pleasant room temperature right away because of the radiated heat.
Ø 2 x AA batteries are required for TV02 to work, please get prepared.
Ø A smart gateway hub is required for the TV02 to work.
Ø Temperature is shown in degrees Celsius.
The ring nut attached to the radiator thermostat can be used universally and without accessories for all valves with a thread size of M30 x 1.5
By means of the adapters in the delivery, the device can be installed on radiator valves of type Danfoss RA, Danfoss RAV, and Danfoss RAVL.
1 Auto Mode
In automatic mode, the temperature is controlled in accordance with the set heating profile. Manual changes are activated until the next point at which the profile changes. Afterwards, the defined heating profile will be activated again. To activate the automatic mode, please proceed as follows:
App operation: Click the auto mode icon in the App control panel.
2 Manual Mode
In manual mode, the temperature is controlled in accordance with the current temperature set via ‘+/-’ button. The temperature remains activated until the next manual change. To activate the manual mode, please proceed as follows:
App operation: Click the manual mode icon in the App control panel.
3 Holiday Mode
When you go out or go to a party, you will use the holiday mode. The holiday mode will automatically start at the set time starting point and run the holiday temperature. When the holiday mode is not activated, and you want to view the holiday mode settings, please press the Mode button to view, the holiday mode icon will flash for 5 seconds and then it will automatically return to the auto mode.If you want to end your holiday mode earlier, press the Mode button to cancel.
App operation:Click the Mode icon to switch to the holiday mode in the App control panel, and switch to any other mode to cancel the holiday mode.